Nintendo Switch Headphone Jack and Game Card Board Replacement

Werkzeuge

• Coffee Filters or a lint-free cloth Verfügbarkeit: Externe Bezugsquelle Bei iFixit kaufen →
• Isopropyl Alcohol Verfügbarkeit: Externe Bezugsquelle Bei iFixit kaufen →
• Phillips #000 Screwdriver Verfügbarkeit: Externe Bezugsquelle Bei iFixit kaufen →
• Spudger Verfügbarkeit: Bestellbar Im Shop ansehen →
• Tri-point Y00 Screwdriver Verfügbarkeit: Externe Bezugsquelle Bei iFixit kaufen →

Ersatzteile

• iFixit Thermal Putty Verfügbarkeit: Externe Bezugsquelle Bei iFixit kaufen →
• Nintendo Switch (2017 HAC-001) Game Card Reader Verfügbarkeit: Externe Bezugsquelle Bei iFixit kaufen →

Anleitung

1. Step 1

   • 
   • 
   • 

   Use a clean fingernail to flip open the lock on the game card reader ZIF connector by prying it straight up.

2. Step 2

   • 
   • 
   • 

   Use the tip of a spudger to gently slide the game card reader ribbon cable out of its socket.

3. Step 3

   • 
   • 

   Use a Phillips driver to remove the two 3.1 mm screws from the headphone jack bracket.

4. Step 4

   • 

   Remove the headphone jack bracket.

5. Step 5

   • 
   • 

   Use a Phillips driver to remove the single 3.1 mm screw from the headphone jack and game card board.

6. Step 6

   • 
   • 

   Use the tip of a spudger to disconnect the headphone jack by prying its connector straight up.

7. Step 7

   • 
   • 
   • 

   Gently lift the game card reader board, starting with the headphone jack.

   Slide the game card reader board away from the copper heat pipe, and remove it.

8. Reassembly Note

   • 
   • 
   • 

Abschluss

To reassemble your device, follow these instructions in reverse order.