PlayStation 4 Fan Replacement
The official guide has been updated and can be found here. This guide is archived for historical purposes.
If your PS4 is running hard and constantly overheating and has led you to replacing the fan, follow the steps below. Be aware that any replacement or teardown beyond the hard drive voids the Sony warranty.
Removing the motherboard separates the original thermal paste between the processor and the heat sink. Before you reassemble your device, reapply a new layer of thermal paste. Follow this guide to learn how.
Lieber von uns ausführen lassen? Angebot innerhalb eines Werktages.
Werkzeuge
- Arctic Silver ArctiClean Verfügbarkeit: Externe Bezugsquelle Bei iFixit kaufen →
-
Arctic Silver Thermal Paste Verfügbarkeit: Externe Bezugsquelle Bei iFixit kaufen →
-
Phillips #1 Screwdriver Verfügbarkeit: Externe Bezugsquelle Bei iFixit kaufen →
-
TR9 Torx Security Screwdriver Verfügbarkeit: Externe Bezugsquelle Bei iFixit kaufen →
Ersatzteile
-
PlayStation 4 (CUH-10XXA and CUH-11XXA) Fan Verfügbarkeit: Externe Bezugsquelle Bei iFixit kaufen →
- PlayStation 4 Console Screw Set Verfügbarkeit: Externe Bezugsquelle Bei iFixit kaufen →
- PlayStation 4 Midframe Verfügbarkeit: Externe Bezugsquelle Bei iFixit kaufen →
Anleitung
-
Step 1
Remove three, 5mm Phillips head #1 screws.
Lift straight up on the metal tray to remove it.
-
-
Step 2
The fan is now exposed, remove the two 9mm Phillips head #1 screws.
If your PS4 has a third screw at the upper right, remove it as well.
Lift the fan up to remove it for replacement.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.