PlayStation 4 Power Supply Replacement
Follow this guide to replace the power supply on your Sony Playstation 4.
Unplug your PS4 before beginning any repairs.
Lieber von uns ausführen lassen? Angebot innerhalb eines Werktages.
Werkzeuge
-
Phillips #0 Screwdriver Verfügbarkeit: Externe Bezugsquelle Bei iFixit kaufen →
-
TR8 Torx Security Screwdriver Verfügbarkeit: Externe Bezugsquelle Bei iFixit kaufen →
-
Tweezers Verfügbarkeit: Externe Bezugsquelle Bei iFixit kaufen →
Ersatzteile
-
PlayStation 4 ADP-200ER Power Supply Verfügbarkeit: Externe Bezugsquelle Bei iFixit kaufen →
-
PlayStation 4 ADP-240CR Power Supply Verfügbarkeit: Externe Bezugsquelle Bei iFixit kaufen →
Anleitung
-
Flip over the PS4
Flip the PS4 upside-down with the back side facing towards you.
-
-
Remove the warranty stickers
Use tweezers to remove the two stickers in the center of the back of the PS4 exposing two case screws.
-
-
Remove the plastic screw covers
Use tweezers to carefully remove the plastic screw covers in each corner, exposing two more case screws.
-
-
Remove the rear case screws
Remove the four 7.2 mm T8 Torx security screws on the back of the PS4.
-
-
Remove the lower case
Use your thumbs to lift the lower case up and off the PS4.
-
-
Step 6
Use a pair of tweezers to pull the power supply cable straight out and disconnect the power supply unit from the motherboard.
-
-
Remove the power supply unit
Remove three 9.7 mm-long TR8 Torx security screws.
Remove two 41 mm-long Phillips screws and brackets.
-
-
Step 8
Lift the power supply straight up and out of the PS4.
-
Abschluss
To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Check out our Answers community for troubleshooting help.
Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.