PlayStation 4 Power Supply Replacement (2)
The official guide has been updated and can be found here. This guide is archived for historical purposes.
Use this guide to replace the power supply of Sony's first generation PS4. Be aware that any replacement or teardown beyond the hard drive voids the Sony warranty.
Lieber von uns ausführen lassen? Angebot innerhalb eines Werktages.
Werkzeuge
-
Phillips #1 Screwdriver Verfügbarkeit: Externe Bezugsquelle Bei iFixit kaufen →
-
TR9 Torx Security Screwdriver Verfügbarkeit: Externe Bezugsquelle Bei iFixit kaufen →
-
Tweezers Verfügbarkeit: Externe Bezugsquelle Bei iFixit kaufen →
Ersatzteile
-
PlayStation 4 ADP-200ER Power Supply Verfügbarkeit: Externe Bezugsquelle Bei iFixit kaufen →
-
PlayStation 4 ADP-240AR Power Supply Verfügbarkeit: Externe Bezugsquelle Bei iFixit kaufen →
-
PlayStation 4 ADP-240CR Power Supply Verfügbarkeit: Externe Bezugsquelle Bei iFixit kaufen →
- PlayStation 4 Console Screw Set Verfügbarkeit: Externe Bezugsquelle Bei iFixit kaufen →
Anleitung
-
Step 1
Flip the PS4 over on its top.
-
-
Step 2
Remove the four stickers on the back of the PS4.
-
-
Step 3
Remove the three 9mm TR8 Torx Security screws on the back of the system.
-
-
Step 4
Remove the bottom panel by lifting the front piece up and sliding the panel towards the back.
-
-
Step 5
Remove the three 9mm TR9 Torx screws.
Remove the two 4cm Phillips head #1 screws.
-
-
Step 6
Lift straight up on the power supply.
-
-
Step 7
Remove the 5 wire plug that is attached from the power supply to the motherboard.
You can now fully remove the power supply from the system.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.