Xbox Series S Foot Replacement
If your Xbox Series S rocks when you push on it, a foot is likely missing or damaged. Follow this guide to replace the missing, damaged, or flattened foot.
Lieber von uns ausführen lassen? Angebot innerhalb eines Werktages.
Werkzeuge
-
Coffee Filters or a lint-free cloth Verfügbarkeit: Externe Bezugsquelle Bei iFixit kaufen →
-
Isopropyl Alcohol 70% Verfügbarkeit: Externe Bezugsquelle Bei iFixit kaufen →
-
Spudger Verfügbarkeit: Bestellbar Im Shop ansehen →
-
Toothpick Verfügbarkeit: Externe Bezugsquelle Bei iFixit kaufen →
-
Tweezers Verfügbarkeit: Externe Bezugsquelle Bei iFixit kaufen →
Ersatzteile
-
Microsoft Xbox Series S Model 1883 (14 digit serial number) Feet - Genuine Verfügbarkeit: Externe Bezugsquelle Bei iFixit kaufen →
Anleitung
-
Set your Xbox down
Place your Xbox on your work surface so that the foot you're replacing is facing upward.
-
-
Pry up the old foot
Insert the point of a spudger underneath one end of the foot.
Pry up to separate the foot from the Xbox.
Remove the foot.
-
-
Clean the footwell
Apply a drop of >70% isopropyl alcohol to the footwell.
Use the point of a spudger or a toothpick to scrape and loosen any adhesive residue in the footwell.
Wipe the footwell with a lint-free cloth or a coffee filter.
-
-
Replace the foot
Pick up a foot from the replacement sheet.
Align the foot in its footwell.
Use your finger to press the foot down for ten seconds to secure it onto your Xbox.
-
Abschluss
If your Xbox is missing additional feet, repeat the procedure to replace them.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.