Xbox Series X Base Replacement
Use this guide to replace or remove the base (aka foot or circular pad) on an Xbox Series X.
Before you begin, completely power down and unplug all cables from your console. Remember to follow general electrostatic discharge (ESD) safety procedures while repairing the console.
Lieber von uns ausführen lassen? Angebot innerhalb eines Werktages.
Werkzeuge
-
Flashlight Verfügbarkeit: Externe Bezugsquelle Bei iFixit kaufen →
-
Flathead 3/32" or 2.5 mm Screwdriver Verfügbarkeit: Externe Bezugsquelle Bei iFixit kaufen →
Ersatzteile
-
Microsoft Xbox Series X All-Digital Model 1882 (14 digit serial number) Base Foot - Genuine Verfügbarkeit: Externe Bezugsquelle Bei iFixit kaufen →
Anleitung
-
Unlatch the base
A locking tab on the bottom of the shell (under the base) holds the base in place.
Stick a long, skinny flathead screwdriver through one of the vent holes on the back of your Xbox, near the locking tab.
Insert the screwdriver between the locking tab and the base. This might take a few tries—use a flashlight if you're having trouble.
Use the screwdriver to pry the tab inward (away from the base) into its open and unlocked position.
Keep the tab held open for the next step.
-
-
Twist and remove the base
With the locking tab held open, grip the base and rotate it counterclockwise to unlock it from the shell.
Remove the base.
-
Abschluss
Congratulations on your repair!
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Xbox Series X Answers community for help.